| |
Electrical Technology |
| |
-
ELT 1144 - AC & DC Circuits for Electrical Technology 4 SH
Principles and theories associated with AC and DC circuits used in the electrical trades. Includes the study of electrical circuits, laws and formulas, and the use of test equipment to analyze AC and DC circuits. (3 hr lecture, 2 hr lab)
|
| |
-
ELT 1183 - Industrial Wiring 3 SH
(Prerequisites: ELT 1193 ) This course includes instruction and practice in the installation of industrial electrical services including the types of conduit and other raceways, National Electrical Code® requirements, and three-phase distribution networks. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1193 - Fundamentals of Electricity 3 SH
This course is designed to introduce fundamental skills associated with all electrical courses. Safety, basic tools, special tools, equipment, and an introduction to simple AC and DC circuits will be included. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1213 - Electrical Power 3 SH
(Pre/Corequisites: ELT 1193 or equivalent) This course provides information on electrical motors and their installation. Instruction and practice in using the different types of electrical motors, transformers, and alternators. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1223 - Motor Maintenance and Troubleshooting 3 SH
(Prerequisites: ELT 1213 ) This course provides instruction in the principles and practice of motor repair. This course includes topics on the disassembly/assembly and preventive maintenance of common electrical motors. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1253 - Branch Circuit and Service Entrance Calculations 3 SH
This course is designed to teach students the calculations of circuit sizes for all branch circuits and service entrances in all electrical installation. Proper use of the National Electrical Code® will be required. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1263 - Electrical Drawing & Schematics 3 SH
(Prerequisites: ELT 1193 ) This course introduces architectural, industrial, mechanical, and electrical symbols needed to read blueprints and schematic diagrams. Prints and drawings associated with electrical wiring will also be studied. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1283 - Cost Estimation for Electrical Installation 3 SH
(Prerequisites: ELT 1193 ) This course gives students the knowledge and ability to estimate the cost of an electrical installation using specifications for various structures. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1313 - Automated Manufacturing Controls for Electrical Technology 3 SH
(Prerequisites: ELT 1413 , ELT 2613 , ELT 2423 ; Instructor Approval) This course is designed to teach the students the integrated control systems found in automated systems. Emphasis will be placed on encoders, optical devices, servo motors, stepper motors, computerized numerical control (CNC), vision and sensing systems, lasers, programmatic controllers, solid state motor controls, and other similar devices. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1324 - Calibration and Measurement Principles Used in the Electrical Industry 4 SH
(Prerequisites: ELT 2613 , ELT 2623 ; Instructor Approval) This course introduces the students to various terms related to measurement principles and calibration techniques used in the electrical industry. With PLCs, the topic also includes the procedures and calibration of various instruments and PLCs used in industry. (3 hr lecture, 2 hr lab)
|
| |
-
ELT 1334 - Flexible Manufacturing Systems for Electrical Technology 4 SH
(Prerequisites: ELT 1413 , ELT 2423 , ELT 2613 , ELT 2623 , Instructor Approval) This course is a production project that requires the student to apply technical skills acquired in previous courses. Project management is provided by the instructor with the students working as teams in each particular area of the manufacturing system. The students are required to plan the project and prepare the integrated system to manufacture a product. This includes all software, hardware, fixtures, clamping mechanisms, material handling requirements, sensors and interfacing and external control devices. (2 hr lecture, 4 hr lab)
|
| |
-
ELT 1343 - Fundamentals of Instrumentation 3 SH
(Prerequisites: ELT 1144 , ELT 1193 ; Instructor Approval) This course provides students with a general knowledge of instrumentation principles as they relate to the electrical industry. This course includes instruction in the basics of hydraulics and pneumatics and the use of electrical circuits in the instruction process. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1353 - Fundamentals of Robotics for Electrical Technology 3 SH
(Prerequisites: ELT 1413 , ELT 2613 , ELT 2423 , Instructor Approval) This course is designed to introduce the student to industrial robots. Topics to be covered include robotics history, industrial robot configurations, operations and basic programming and how they relate to the electrical industry. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1363 - Industrial Hydraulics for Electrical Technology 3 SH
(Prerequisites: ELT 1413 , ELT 2613 , ELT 2423 , Instructor Approval) This course introduces the students to basic hydraulics, hydraulics actuators, accumulators, valves, pumps, motors, fluids, coolers, and filters. Emphasis is placed on development of hydraulic control circuits, electrical interfacing techniques, and troubleshooting. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1373 - Industrial Pneumatics for Electrical Technology 3 SH
(Prerequisites: ELT 1413 , ELT 2613 , ELT 2423 , Instructor Approval) This course introduces the students to basic pneumatic principles, compression of air, work devices, control devices, and circuit diagrams. Emphasis is placed on development of pneumatic control circuits, electromechanical control of fluid power, and troubleshooting techniques. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1383 - Industrial Robotics for Electrical Technology 3 SH
(Prerequisites: ELT 1353 , ELT 1413 , ELT 2613 , ELT 2423 , Instructor Approval) This course teaches the operating systems and advanced programming methods of industrial robots. Actual industrial grade robots are used to train the student in the areas of operation, maintenance, troubleshooting, service procedures, and robotics applications. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1393 - Servo Control Systems for Electrical Technology 3 SH
(Prerequisites: ELT 1413 , ELT 2613 , ELT 2423 , Instructor Approval) This course is designed to teach servo components; servo valves; velocity servos; positional servos; force, pressure, and torque servos; servo amplifiers; programmers; and servo analysis. Emphasis is placed on servo trim and maintenance and the applications of servo systems. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1413 - Motor Control Systems 3 SH
(Prerequisites: ELT 1193 or equivalent) This course includes the installation of different motor control circuits and devices. Emphasis is placed on developing the student’s ability to diagram, wire, and troubleshoot the different circuits and mechanical control devices. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1434 - Solid State Devices and Circuits for Electrical Technology 4 SH
(Prerequisites: ELT 1144 , ELT 1193 ; Instructor Approval) Active devices that include PN junction diodes, bipolar transistors, bipolar transistor circuits, and unipolar devices with emphasis on low frequency application and troubleshooting. (2 hr lecture, 4 hr lab)
|
| |
-
ELT 1513 - Data Acquisition and Communications 3 SH
(Prerequisites: ELT 1413 , ELT 2613 , ELT 2423 , Instructor Approval) This is a course in acquisition and communication of systems data in industrial automated applications. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1523 - Fundamentals of Fiber Optics for Electrical Technology 3 SH
(Prerequisites: ELT 1144 , ELT 1193 ; Instructor Approval) Fiber-optic cable in modern industry applications. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1533 - Fundamentals of Data Communications for Electrical Technology 3 SH
(Prerequisites: ELT 1413 , ELT 2613 , ELT 2423 , Instructor Approval) Concepts of telephony, local area networks, wide area networks, data transmission, and topology methods. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 1544 - Network Systems for Electrical Technology 4 SH
(Prerequisites: ELT 1144 , ELT 1193 ; Instructor Approval) Networking fundamentals, voice networking, LANS, and internet. Also, upgrading of computers to support LAN technology. (2 hr lecture, 4 hr lab)
|
| |
-
ELT 1553 - Satellite Systems 3 SH
(Prerequisites: ELT 1144 , ELT 1193 ; Instructor Approval) Service, repair, and installation of residential and commercial satellite receiving systems and how they are used in the electrical industry. (1 hr lecture, 4 hr lab)
|
| |
-
ELT 1614 - Principles of Hydraulics and Pneumatics 4 SH
(Prerequisites: ELT 1413 , ELT 2613 , ELT 2423 , Instructor Approval) Instruction in basic principles of hydraulics and pneumatics and the inspection maintenance, and repair of hydraulic and pneumatic system. (1 hr lecture, 6 hr lab)
|
| |
-
ELT 2113 - Equipment Maintenance, Troubleshooting and Repair 3 SH
This course includes maintenance and troubleshooting techniques, use of technical manuals and test equipment, and inspection/evaluation/repair of equipment. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 2423 - Solid State Motor Control 3 SH
(Prerequisites: ELT 1413 ) This course provides knowledge of the principles and operation of solid state motor control and variable frequency drives. The design, installation, and maintenance of different solid state devices for motor control will be introduced. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 2613 - Programmable Logic Controllers 3 SH
(Prerequisites: ELT 1413 ) This course provides instruction in the use of programmable logic controllers (PLCs) in modern industrial settings. The operating principles, installation and basic programming of PLCs will be covered. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 2623 - Advanced Programmable Logic Controllers 3 SH
(Prerequisites: ELT 2613 ) This is an advanced PLC course which provides instruction in the various operations and installations of advanced electrical control systems. Information in areas such as sequencer, program control, introduction to function blocks, sequential function chart, introduction to HMI, and logical and conversion instructions will be included. (2 hr lecture, 2 hr lab)
|
| |
-
ELT 2911 - Special Project I 1 SH
(Prerequisites: Instructor Approval) Practical application of skills and knowledge gained in other electrical or electrical-related technical courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student’s learning experience. (2 hr lab)
|
| |
-
ELT 2912 - Special Project I 2 SH
(Prerequisites: Instructor Approval) Practical application of skills and knowledge gained in other electrical or electrical-related technical courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student’s learning experience. (4 hr lab)
|
| |
-
ELT 2913 - Special Project I 3 SH
(Prerequisites: Instructor Approval) Practical application of skill and knowledge gained in other electrical or electrical related technical courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student’s learning experience. (6 hr lab)
|
| |
-
ELT 2923 - Supervised Work Experience I 3 SH
(Prerequisites: Instructor Approval) A cooperative program between industry and education and is designed to integrate the student’s technical studies with industrial experience. (9 hr supervised work experience per week)
|
| |
-
ELT 2931 - Special Project II 1 SH
(Prerequisites: ELT 2913 ) A continuation of practical application of skills and knowledge gained in other electrical or electrical-related technical courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student’s learning experience. (2 hr lab)
|
| |
-
ELT 2932 - Special Project II 2 SH
(Prerequisites: ELT 2913 ) A continuation of practical application of skills and knowledge gained in other electrical or electrical-related technical courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student’s learning experience. (4 hr lab)
|
| |
-
ELT 2933 - Special Project II 3 SH
(Prerequisites: ELT 2913 ; Instructor Approval) A continuation of practical application of skill and knowledge gained in other electrical or electrical related technical courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student’s learning experience. (6 hr lab)
|
| |
-
ELT 2943 - Supervised Work Experience II 3 SH
(Prerequisites: ELT 2923 ; Instructor Approval) A continuation of the cooperative program between industry and education and is designed to integrate the student’s technical studies with industrial experience. (9 hr supervised work experience per week)
|
Electronics and Related Engineering Technology |
| |
-
EET 1114 - DC Circuits 4 SH
This course is designed for students to know the principles and theories associated with DC circuits. This course includes the study of electrical circuits, laws, and formulae, and the use of test equipment to analyze AC circuits. (2 hr lecture, 4 hr lab)
|
| |
-
EET 1123 - AC Circuits 3 SH
This course is designed to provide students with the principles and theories associated with AC circuits. This course includes the study of electrical circuits, laws, and formulae, and the use of test equipment to analyze AC circuits. (2 hr lecture, 2 hr lab)
|
| |
-
EET 1214 - Digital Electronics 4 SH
This course is designed to introduce the student to number systems, logic circuits, counters, registers, memory devices, combination logic circuits, Boolean algebra, and a basic computer system. (3 hr lecture, 2 hr lab)
|
| |
-
EET 1311 - Orientation to Biomedical Careers 1 SH
This course is an orientation to the Biomedical field. Topics covered are the different career paths that are open to students and the organization and the operation of the environment. (1 hr lecture)
|
| |
-
EET 1334 - Solid State Devices and Circuits 4 SH
(Pre/Corequisites: EET
1114 , EET 1123 ) This course is designed to introduce the student to active devices which include PN junction diodes, bipolar transistors, bipolar transistor circuits, and unipolar devices with emphasis on low frequency application and troubleshooting. (2 hr lecture, 4 hr lab)
|
| |
-
EET 1353 - Fundamentals of Robotics 3 SH
This course is designed to introduce the student to industrial robots. Topics to be covered include robotics history, industrial robot configurations, operation, and basic programming and how they relate to the electrical industry. (2 hr lecture, 2 hr lab)
|
| |
-
EET 1363 - Microcontrollers 3 SH
(Prerequisites: EET 1214 ) This course begins with a brief overview of microprocessors as a precursor to microcontrollers. Next, a basic understanding of the use, terminology, and potential of microcontrollers is discussed. Programming skills and concepts taught in this course help students develop, execute, and debug programs for a microcontroller. A hands-on approach will teach the essential skills for creating a simple sensor-driven microcontroller system and will be reinforced with interactive projects. (1 hr lecture, 4 hr lab)
|
| |
-
EET 1613 - Computer Fundamentals for Electronics/Electricity 3 SH
This course introduces the student to basic computer science as used in electricity/electronics areas. Computer nomenclature, logic, numbering systems, coding, operating system commands, editing, and batch files are covered. (2 hr lecture, 2 hr lab)
|
| |
-
EET 1713 - Drafting for Electronics/Electrical Technology 3 SH
This course is designed to provide instruction on the preparation and interpretation of schematics. (1 hr lecture, 4 hr lab)
|
| |
-
EET 2113 - Supervised Work Experience in Biomedical Equipment Repair Technology I 3 SH
(Prerequisites: Instructor Approval) This cooperative program between the healthcare facility and education is designed to integrate the student’s technical studies with health care experience. (NOTE: Biomedical equipment used in this course is for instructional purposes ONLY and not to be used in patients’ care.) (9 hr externship)
|
| |
-
EET 2115 - Biomedical Internship I 5 SH
(Prerequisites: Sophomore standing in Electronics, EET 1311 ) A review of the fundamental practice of Biomedical Service as provided in the hospital environment. The student will intern under the supervision of a certified technician. (1 hr lecture, 12 hr clinical)
|
| |
-
EET 2223 - Supervised Work Experience in Biomedical Equipment Repair Technology II 3 SH
(Prerequisites: EET 2113 & Instructor Approval) Continuation of EET 2113 with advanced study in the repair and maintenance of biomedical equipment. (9 hr externship)
|
| |
-
EET 2225 - Biomedical Internship II 5 SH
(Prerequisites: EET 2115 ) A continuation of Biomedical Internship I with emphasis on the repair of biomedical equipment. (1 hr lecture, 12 hr clinical)
|
| |
-
EET 2334 - Linear Integrated Circuits 4 SH
(Prerequisites: EET 1334 ) This course is designed to provide the student with skills and knowledge associated with advanced semiconductor devices and linear integrated circuits. Emphasis is placed on linear integrated circuits used with operational amplifiers, active filters, voltage regulators, timers, and phase-locked loops. (3 hr lecture, 2 hr lab)
|
| |
-
EET 2363 - Programmable Logic Controllers 3 SH
(Prerequisites: EET 1114 , EET 1334 , EET 1214 , EET 1123 ) This course covers use of programmable logic controllers (PLCs) in modern industrial settings as well as the operating principles of PLCs and practice in the programming, installation, and maintenance of PLCs. (2 hr lecture, 2 hr lab)
|
| |
-
EET 2373 - Programmable Logic Controllers Multi-Platform 3 SH
This course covers use of programmable logic controllers (PLCs) in modern industrial settings as well as the operating principles of PLCs and practice in the accelerated programming across multiple PLC platforms, installation and maintenance of PLCs. (1 hr lecture, 4 hr lab)
|
| |
-
EET 2374 - Advanced Robotics 4 SH
This course provides advanced instruction to microcontrollers and robotics, with a focus on the operation and execution of a robotic system. This course will be project and team based. Students will work in groups to design, program, and execute their robotic design. Students will present their designed robot, along with a PowerPoint presentation at the end of the course. (1 hr lecture, 6 hr lab)
|
| |
-
EET 2383 - Advanced Programmable Logic Controllers 3 SH
(Prerequisites: EET 2363 ) Advanced PLC course that provides instruction in the various operations, installations, and maintenance of electric motor controls. Also, information in such areas as sequencer, program control, introduction to function blocks, sequential function chart, introduction to HMI, and logical and conversion instructions. (2 hr lecture, 2 hr lab)
|
| |
-
EET 2414 - Electronic Communications 4 SH
(Prerequisites: EET
1334 ) This course is designed to provide the student with concepts and skills related to analog and digital communications. Topics covered include amplitude and frequency modulation, transmission, and reception, data transmission formats and codes, the RS-232 interface, and modulation-demodulation of digital communications. (2 hr lecture, 4 hr lab)
|
| |
-
EET 2423 - Fundamentals of Fiber Optics 3 SH
(Prerequisites: EET 2414 ) This course is designed to provide skills and knowledge concerning the use of fiber optic cable in modern industry applications. (2 hr lecture, 2 hr lab)
|
| |
-
EET 2514 - Interfacing Techniques 4 SH
This course is a study of data acquisition devices and systems including their interface to microprocessors and other control systems. (2 hr lecture, 4 hr lab)
|
| |
-
EET 2912 - Special Project 2 SH
Practical application of skills and knowledge gained in other technical courses. The instructor works closely with the student to ensure that the section of a project will enhance the student’s learning experience. (4 hr lab)
|
| |
-
EET 2913 - Special Project 3 SH
(Prerequisites: Instructor Approval) This course is designed to provide the student with practical application of skills and knowledge gained in other electronics or electronics-related technical courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student’s learning experience. (6 hr lab)
|
| |
-
EET 2923 - Supervised Work Experience in Electronics Technology 3 SH
(Prerequisites: Instructor Approval and completion of at least one semester of advanced coursework in electrical/electronics related programs) This course is a cooperative program between industry and education and is designed to integrate the student’s technical studies with industrial experience. Variable credit is awarded on the basis of semester hour per 45 industrial contact hours. (9 hr externship)
|
Emergency Medical Sciences |
| |
-
EMS 1117 - Emergency Medical Technician 7 SH
(Prerequisites: Current MS Driver’s License and Healthcare Provider Card issued by the American Heart Association) This course includes responsibilities of the EMT during each phase of an ambulance run, patient assessment, emergency medical conditions, appropriate emergency care, and appropriate procedures for transporting patients. (4 hr lecture, 4 hr lab, 3 hr clinical)
|
| |
-
EMS 1118 - Emergency Medical Technician 8 SH
(Prerequisites: Current MS Driver’s License and Healthcare Provider Card issued by the American Heart Association) This course includes responsibilities of the EMT during each phase of the ambulance run, patient assessment, emergency medical conditions, appropriate emergency care, and appropriate procedures for transporting patient. (5 hr lecture, 4 hr lab, 3 hr clinical)
|
| |
-
EMS 1122 - Introduction to EMS Systems 2 SH
(Prerequisites: EMS 1118 , BIO 2513 , BIO 2511 , BIO 2523 , BIO 2521 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) (Corequisites: EMS 1314 , EMS 1414 , EMS 1513 , EMS 1614 ) This course introduces the student to the Emergency Medical Services (EMS) systems, roles and responsibilities of the paramedic, well-being of the paramedic, illness and injury prevention, medical/legal issues, ethical issues, therapeutic communications, and life span development. (1 hr lecture, 2 hr lab)
|
| |
-
EMS 1314 - Airway: Management, Respiration and Oxygenation 4 SH
(Prerequisites: EMS 1118 , BIO 2513 , BIO 2511 , BIO 2523 , BIO 2521 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) (Corequisites: EMS 1122 , EMS 1414 , EMS 1513 , EMS 1614 ) This course will provide the student with the essential knowledge to attain an airway and manage the respiratory system using advanced techniques. (1 hr lecture, 6 hr lab)
|
| |
-
EMS 1414 - Patient Assessment 4 SH
(Prerequisites: EMS 1118 , BIO 2513 , BIO 2511 , BIO 2523 , BIO 2521 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) (Corequisites: EMS 1314 , EMS 1122 , EMS 1513 , EMS 1614 ) This course will teach comprehensive history taking and physical exam techniques. (1 hr lecture, 6 hr lab)
|
| |
-
EMS 1422 - EMS Special Patient Populations 2 SH
(Prerequisites: EMS 1122 , EMS 1314 , EMS 1414 , EMS 1513 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) (Corequisites: EMS 1525 , EMS 1825 , EMS 2714 , EMS 2855 ) This course will provide a comprehensive overview of providing care for the patient with special needs. (1 hr lecture, 2 hr lab)
|
| |
-
EMS 1513 - EMS Practicum I 3 SH
(Prerequisites: EMS 1118 , BIO 2513 , BIO 2511 , BIO 2523 , BIO 2521 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) (Corequisites: EMS 1314 , EMS 1414 , EMS 1122 , EMS 1614 ) This course will provide clinical training on the skills and knowledge obtained in the classroom. This will be a supervised activity carried out in the clinical and field setting at approved sites. (9 hr clinical)
|
| |
-
EMS 1525 - EMS Practicum II 5 SH
(Prerequisites: EMS 1122 , EMS 1314 , EMS 1414 , EMS 1513 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) (Corequisites: EMS 1422 , EMS 1825 , EMS 2714 , EMS 2855 ) This course will provide clinical and field training on the skills and knowledge obtained in the classroom. This will be a supervised activity carried out in the clinical and field setting at approved sites. (9 hr clinical, 6 hr field clinical)
|
| |
-
EMS 1614 - Pharmacology 4 SH
(Prerequisites: EMS 1118 , BIO 2513 , BIO 2511 , BIO 2523 , BIO 2521 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) (Corequisites: EMS 1314 , EMS 1414 , EMS 1513 , EMS 1122 ) This course will teach comprehensive pharmacodynamics and pharmacokinetics. (2 hr lecture, 4 hr lab)
|
| |
-
EMS 1825 - Cardiology 5 SH
(Prerequisites: EMS 1122 , EMS 1314 , EMS 1414 , EMS 1513 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) (Corequisites: EMS 1525 , EMS 1422 , EMS 2714 , EMS 2855 ) This class will teach a comprehensive approach to the care of patients with acute and complex cardiovascular compromise. (2 hr lecture, 6 hr lab)
|
| |
-
EMS 2414 - Maternal/Child Emergencies 4 SH
(Prerequisites: EMS 1422 , EMS 1525 , EMS 1825 , EMS 2714 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) (Corequisites: EMS 2565 , EMS 2912 ) This course will provide a detailed understanding of the anatomic structures, physiology, and pathophysiology encountered when providing care in gynecological and obstetrical emergencies as well as pediatric emergencies. (3 hr lecture, 2 hr lab)
|
| |
-
EMS 2565 - EMS Practicum III 5 SH
(Prerequisites: EMS 1422 , EMS 1525 , EMS 1825 , EMS 2714 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) (Corequisites: EMS 2414 , EMS 2912 ) This course will provide advanced clinical and field experiences in the skills and knowledge obtained in the classroom with an emphasis on leadership skills. These will be supervised activities carried out in the clinical and out-of-hospital field setting at approved sites with an approved preceptor. (15 hr clinical)
|
| |
-
EMS 2714 - Trauma 4 SH
(Prerequisites: EMS 1122 , EMS 1314 , EMS 1414 , EMS 1513 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) This course will provide advanced instruction in the integration of pathophysiological principles and assessment findings to formulate a field impression and implement a treatment plan for a suspected trauma patient. (2 hr lecture, 4 hr lab)
|
| |
-
EMS 2855 - Medical 5 SH
(Prerequisites: EMS 1122 , EMS 1314 , EMS 1414 , EMS 1513 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) (Corequisites: EMS 1422 , EMS 1825 , EMS 2714 , EMS 1525 ) This course will provide a detailed understanding of the anatomic structures, physiology and pathophysiology encountered when providing care in medical emergencies involving pulmonary, allergy and anaphylaxis, gastroenterology, renal urology and hematology. (2 hr lecture, 6 hr lab)
|
| |
-
EMS 2912 - EMS Operations 2 SH
(Prerequisites: EMS 1422 , EMS 1525 , EMS 1825 , EMS 2714 . Additional prerequisite: Current National Registry registration as an EMT, current MS certification as an EMT and current Healthcare Provider card issued by the American Heart Association) (Corequisites: EMS 2414 , EMS 2565 ) This course teaches the leadership skills necessary to manage complex situations including patient care, management of the hazardous and crime scene, supervision, mentoring and leading other personnel. (2 hr lecture)
|
Engineering |
| |
-
EGR 2413 - Engineering Mechanics I: Statics 3 SH
(Prerequisites: PHY 2414 ) (Pre/Corequisites: MAT 2613 ) A lecture course covering the equilibrium of point objects and extended objects in two and three dimensions using vector algebra. Also discussed are distributed forces, structures, friction, and moments of inertia in two and three dimensions. (3 hr lecture)
|
| |
-
EGR 2433 - Engineering Mechanics II: Dynamics 3 SH
(Prerequisites: EGR 2413 , MAT 2613 ) A lecture course that covers kinematics of particles and rigid bodies, kinetics of particles and rigid bodies using force-mass acceleration, energy, and momentum methods. (3 hr lecture)
|
| |
-
EGR 2453 - Mechanics of Materials 3 SH
(Prerequisites: EGR 2433 , MAT 2613 ) A lecture course covering free body diagrams equilibrium of simple structure, shear and moment bending diagrams, analysis of stress and strain, and deflections of beams. (3 hr lecture)
|
English |
| |
-
ENG 0111 - English and Reading Lab I 1 SH
(Corequisites: LLS 0113 ) Opportunity to provide supplemental instruction/practice/support in a structured lab environment. (Institutional credit only) (2 hr lab)
|
| |
-
ENG 0113 - Beginning English and Reading 3 SH
ENG 0113 is an integrated course designed to develop basic writing skills and reading strategies. (Institutional credit only) (3 hr lecture)
|
| |
-
ENG 0114 - Beginning English and Reading 4 SH
ENG 0114 is an integrated course designed to develop basic writing skills and reading strategies. (Institutional credit only) (4 hr lecture)
|
| |
-
ENG 0121 - English and Reading Lab II 1 SH
(Corequisites: LLS 0123 ) Opportunity to provide supplemental instruction/practice/support in a structured lab environment. (Institutional credit only) (2 hr lab)
|
| |
-
ENG 0123 - Intermediate English and Reading 3 SH
(Prerequisites: ENG 0113 ) ENG 0123 is an integrated course designed to advance students to college level writing skills and reading strategies. (Institutional credit only) (3 hr lecture)
|
| |
-
ENG 0124 - Intermediate English and Reading 4 SH
(Prerequisites: ENG 0113 ) ENG 0124 is an integrated course designed to advance students to college level writing skills and reading strategies. (Institutional credit only) (4 hr lecture)
|
| |
-
ENG 0142 - Composition Companion 2 SH
(Corequisites: ENG 1113 ) A companion course to ENG 1113 designed to provide direct support and scaffolding exercises for specific projects in the credit-bearing course. Peer collaboration and one-on-one instructional support through the writing process are emphasized. (Institutional credit only) (2 hr lecture)
|
| |
-
ENG 0143 - Composition Companion 3 SH
(Corequisites: ENG 1113 ) A companion course to ENG 1113 designed to provide direct support and scaffolding exercises for specific projects in the credit-bearing course. Peer collaboration and one-on-one instructional support through the writing process are emphasized. (Institutional credit only) (3 hr lecture)
|
| |
-
ENG 1033 - Technical English 3 SH
(Prerequisites: ENG 0123 or higher or ACT® score of 17 or above or ACCUPLACER score of 88 or above or Next-Generation ACCUPLACER score of 239-300) A course intended for students enrolled in career technical education programs. In this course, students will focus on appropriate writing for business and industry and will produce technical documents, which may include resumes, letters, emails, memos/reports, proposals, multimedia presentations, and other related documents. Topics covered should relate to the student’s program area. This course will satisfy the English requirement for the Associate of Applied Science degree. (3 hr lecture)
|
| |
-
ENG 1113 - English Composition I 3 SH
(Prerequisites: ENG 0123 or higher or ACT® score of 17 or above or ACCUPLACER score of 88 or above or Next-Generation ACCUPLACER score of 239-300) English 1113 prepares the student to think critically and compose texts for academic and professional rhetorical situations. (3 hr lecture)
|
| |
-
ENG 1123 - English Composition II 3 SH
(Prerequisites: ENG 1113 ) ENG 1123 is a continuation of ENG 1113 with emphasis on research, argumentation, and composition. Readings, essays, and a research paper are required. (3 hr lecture)
|
| |
-
ENG 2133 - Creative Writing I 3 SH
(Prerequisites: ENG 1113 or Instructor Approval) ENG 2133 involves reading and writing poetry, short fiction, creative nonfiction and/or drama. (Both workshop and lecture format will be used.)
|
| |
-
ENG 2143 - Creative Writing II 3 SH
(Prerequisites: ENG 2133 ) ENG 2143 is a continuation of reading and writing poetry, short fiction, creative nonfiction, and/or drama. (Both workshop and lecture format will be used.)
|
| |
-
ENG 2153 - Traditional Grammar 3 SH
ENG 2153 focuses on the basic elements of English grammar and mechanics. (3 hr lecture)
|
| |
-
ENG 2223 - American Literature I 3 SH
(Prerequisites: ENG 1123 , REA 0123 or higher) ENG 2223 surveys representative prose and poetry of the United States from its beginnings to the Civil War. (3 hr lecture)
|
| |
-
ENG 2233 - American Literature II 3 SH
(Prerequisites: ENG 1123 , REA 0123 or higher) ENG 2233 surveys representative prose and poetry of the United States from Civil War to the present. (3 hr lecture)
|
| |
-
ENG 2323 - British Literature I 3 SH
(Prerequisites: ENG 1123 , REA 0123 or higher) This course surveys British Literature from the Anglo-Saxon Period through the Restoration and Eighteenth Century. (3 hr lecture)
|
| |
-
ENG 2333 - British Literature II 3 SH
(Prerequisites: ENG 1123 , REA 0123 or higher) This course surveys British Literature from the Romantic Period to the present. (3 hr lecture)
|
| |
-
ENG 2423 - World Literature I 3 SH
(Prerequisites: ENG 1123 , REA 0123 or higher) ENG 2423 surveys texts representative of global and historical diversity from the ancient world through the early modern world. (3 hr lecture)
|
| |
-
ENG 2433 - World Literature II 3 SH
(Prerequisites: ENG 1123 , REA 0123 or higher) ENG 2433 surveys texts representative of global and historical diversity from the Enlightenment Period to the present. (3 hr lecture)
|
| |
-
ENG 2513 - Survey of African-American Literature 3 SH
(Prerequisites: ENG 1123 ) ENG 2513 surveys literature of major African-American writers from its Vernacular Tradition to the present. (3 hr lecture)
|
| |
Page: 1 <- 2
| 3
| 4
| 5
| 6
| 7
| 8
| 9
| 10
| 11
| 12
-> 17 |
Print this Page