| |
Small Engine and Equipment Repair Technology |
| |
-
SET 1212 - Small Engine Measurements 2 SH
A course to develop skills and knowledge related to measurement tools, measurement tool usage, and fasteners of small engine and equipment components. (1 hr lecture, 2 hr lab)
|
| |
-
SET 1213 - Power Sports Brake and Suspension 3 SH
This course will give the student the skills needed to properly diagnose and repair brakes and suspensions systems used in the power sports industry. (2 hr lec, 2 hr lab)
|
| |
-
SET 1233 - Power Sports Mechanics I 3 SH
This course is designed to increase a student’s knowledge covered in prior courses with an emphasis on systems unique to repair sports equipment repair. These areas of study will include, but not limited to lubrication, ignition, exhaust, emissions and cooling systems. (2 hr lecture, 4 hr lab)
|
| |
-
SET 1313 - Four Cycle Engines 3 SH
A course to develop skills and knowledge related to four-cycle small engine and equipment repair and maintenance. Includes instruction in assembly, lubrication, and fuel systems. (2 hr lecture, 2 hr lab)
|
| |
-
SET 1322 - Two Cycle Engine Repair 2 SH
A course to develop skills and knowledge related to two-cycle small engine and equipment repair and maintenance. Includes instruction in assembly, lubrication, and fuel systems. (1 hr lecture, 2 hr lab)
|
| |
-
SET 1323 - Power Sports Transmission System 3 SH
This course takes the student into a level of understanding how the engine power is transmitted to the driving wheel or wheels of motorcycles and ATV’s. These systems are primary drives, clutches, manual, automatic transmissions and final drive systems. (2 hr lecture, 2 hr lab)
|
| |
-
SET 1333 - Power Sports Engine and Fuel Systems 3 SH
This is an advanced course in the diagnosis and repair of engine and fuel systems unique to the power sports industry. (2 hr lecture, 2 hr lab)
|
| |
-
SET 1413 - Small Engine Shop Management 3 SH
Provides students with skills and knowledge related to management and operation of a small engine repair shop. Includes instruction in shop safety and OSHA regulations, shop tools and equipment, shop design, overall shop maintenance, and inventory control. (2 hr lecture, 2 hr lab)
|
| |
-
SET 1512 - Small Engine Frame Inspection and Maintenance 2 SH
A course to develop skills and knowledge related to small equipment frame (chassis) repair and maintenance. Includes instruction in oxyfuel cutting and arc welding as well as paining and other frame (chassis) maintenance. (1 hr lecture, 2 hr lab)
|
| |
-
SET 1713 - Power Sports Brake and Suspension 3 SH
This course will give the student the skills needed to properly diagnose and repair brakes and suspension systems used in the power sports industry. (2 hr lecture, 2 hr lab)
|
| |
-
SET 2134 - Small Engine Mechanics III 4 SH
A continuation of SET 1124 with an emphasis on steering and suspension systems. (8 hr lab)
|
| |
-
SET 2144 - Small Engine Mechanics IV 4 SH
A continuation of SET 2134 with emphasis on troubleshooting and performing maintenance on a variety of systems. (8 hr lab)
|
| |
-
SET 2155 - Small Engine and Equipment Analysis and Repair I 5 SH
A course to provide skills and knowledge related to the operation, troubleshooting, and repair of systems related to equipment. Includes instruction on a variety of equipment and troubleshooting techniques related to equipment. (10 hr lab)
|
| |
-
SET 2165 - Small Engine and Equipment Analysis and Repair II 5 SH
A course to provide advanced skills and knowledge related to the operation, troubleshooting, and repair of systems related to equipment. Includes instruction on a variety of equipment and advanced troubleshooting techniques related to equipment. (10 hr lab)
|
| |
-
SET 2313 - Projects I in Small Engine and Equipment Repair 3 SH
(Prerequisites: Instructor consent required.) A course designed for establishment of skills and knowledge for introductory projects related to small engine and equipment. (6 hr lab)
|
| |
-
SET 2323 - Projects II in Small Engine and Equipment Repair 3 SH
(Prerequisites: Instructor consent required.) A course designed for the establishment of skills and knowledge for basic projects related to the Small Engine and Equipment repair class. (6 hr lab)
|
| |
-
SET 2333 - Projects III in Small Engine and Equipment Repair 3 SH
(Prerequisites: Instructor consent required.) A course designed for establishment of skills and knowledge for intermediate projects related to small engine and equipment. (6 hr lab)
|
| |
-
SET 2343 - Projects IV in Small Engine and Equipment Repair 3 SH
(Prerequisites: Instructor consent required.) A course designed for establishment of skills and knowledge for advanced projects related to small engine and equipment. (6 hr lab)
|
| |
-
SET 2353 - Engine Troubleshooting 3 SH
A course to develop skills and knowledge associated with the basics of equipment diagnostics and trouble shooting. Instruction is provided on tools and equipment used in diagnosis, fasteners, fluids, and measurement devices. (2 hr lecture, 2 hr lab)
|
| |
-
SET 2523 - Maintenance and Repair of Cutting Mechanisms 3 SH
A course to develop skills and knowledge related to the maintenance and repair of cutting mechanisms used in landscape and turf operations including mowers, trimmers, edgers, and saws. Includes instruction in drive systems, blade sharpening and height adjustment, reel grinding and adjustment, and chain saw chain sharpening and adjustment. (2 hr lecture, 2 hr lab)
|
| |
-
SET 2533 - Small Engine and Equipment Hydraulic Systems 3 SH
A course to develop skills and knowledge related to hydraulics as it relates to small equipment chassis repair and maintenance. Includes instruction on hydraulics and will be components, diagnosis and repair of the hydraulic system. (2 hr lecture, 2 hr lab)
|
| |
-
SET 2543 - Transmissions and Transaxles 3 SH
A course to develop skills and knowledge related to small equipment transmissions and transaxles. Includes instruction for transmission and transaxles service, diagnosis, and repair. (2 hr lecture, 2 hr lab)
|
| |
-
SET 2613 - Small Engine Electric Systems 3 SH
A course to develop skills and knowledge related to the operating principles of direct current circuits. Includes instruction on basic electrical principles, safety procedures, batteries, conductors and switches. (2 hr lecture, 2 hr lab)
|
| |
-
SET 2811 - Special Problems I in Small Engine and Equipment Repair 1 SH
(Prerequisites: Instructor consent required.) A course designed to provide the student with practical application of skills and knowledge gained in other Small Engine and Equipment Repair Technology courses through the use of a special problem. The instructor works closely with the student to insure that the selection of a project will enhance the student’s learning experience. (2 hr lab)
|
| |
-
SET 2812 - Special Problems II in Small Engine and Equipment Repair 2 SH
(Prerequisites: Instructor consent required.) A course designed to provide the student with practical application of skills and knowledge gained in other Small Engine and Equipment Repair Technology courses through the use of a special problem. The instructor works closely with the student to insure that the selection of a project will enhance the student’s learning experience. (4 hr lab)
|
| |
-
SET 2813 - Special Problems III in Small Engine and Equipment Repair 3 SH
(Prerequisites: Instructor consent required.) A course designed to provide the student with practical application of skills and knowledge gained in other Small Engine and Equipment Repair Technology courses through the use of a special problem. The instructor works closely with the student to insure that the selection of a project will enhance the student’s learning experience. (6 hr lab)
|
| |
-
SET 2916 - Supervised Work Experience in Small Engine and Equipment Repair 6 SH
(Prerequisites: Must complete at least 12 hours of Small Engine and Equipment Repair before enrolling. Instructor consent required.) A course that is a cooperative program between industry and education designed to integrate the student’s technical studies with industrial experience.
|
Sociology |
| |
-
SOC 1213 - Community Involvement 3 SH
This is an elective course designed to provide students with experience in a public or human service agency, or other appropriate work environment, and to encourage them to recognize the value of their active participation in the service/learning process. (2 hr lecture, 2 hr lab)
|
| |
-
SOC 1513 - Ethnic Relations 3 SH
Economic, political, educational, and racial status of ethnic minorities are examined, including relations between minority and dominant groups. (3 hr lecture)
|
| |
-
SOC 2113 - Introduction to Sociology 3 SH
The nature and development of culture; social aspects of personality; culture change; and, analysis of community life, population trends, social classes, institutions, processes, and organization. (3 hr lecture)
|
| |
-
SOC 2133 - Social Problems 3 SH
(Prerequisites: SOC 2113 ) A study of the nature, scope and effects of the major social problems of today and the attempts to alleviate them, including such problems as poverty, crime, alcoholism, drug addiction, health care issues, mental illness, and aging. (3 hr lecture)
|
| |
-
SOC 2143 - Marriage and Family 3 SH
(Prerequisites: SOC 2113 ) A study of the institutions of marriage and the family as a cultural unit in contemporary America, exploring how marriages and family patterns are formed, maintained, and change over the life cycle. (3 hr lecture)
|
| |
-
SWK 1113 - Social Work: A Helping Profession 3 SH
The course exposes students to a “helping” profession that plays a central role in addressing human needs. Students are exposed to personal/lived experiences of social work clients and successes of “real” social workers in respective practices such as mental health, child welfare, disaster, corrections, faith-based, military, international relief and industry. (3 hr lecture)
|
Spanish Conversation |
| |
-
ATE 1213 - Spanish Conversation 3 SH
(Prerequisites: ENG 0113 , REA 0123 ) Introduction to the essential technical vocabulary using field experiences and daily situations. Practice of basic communication skills in Spanish applied to the work environment. (3 hr lecture)
|
Speech and Theatre |
| |
-
SPT 0113 - Basic Speaking 3 SH
Focuses on basic communication skills, basic communication models, pronunciation and articulation, and dealing with stage fright. Institutional credit only. Will not substitute for the speech requirements in any curriculum. Institutional credit only. (3 hr lecture)
|
| |
-
SPT 1113 - Public Speaking I 3 SH
(Prerequisites: English and Reading Placement Level 3) Study and practice in making speeches for a variety of public forums. Major emphasis is placed on effective speech preparation and delivery. (3 hr lecture)
|
| |
-
SPT 1123 - Public Speaking II 3 SH
(Prerequisites: SPT 1113 ) A continuation in the study of public speaking with emphasis on research, organization and delivery techniques. (3 hr. lecture)
|
| |
-
SPT 1131 - Forensics I 1 SH
(Prerequisites: English and Reading Placement Level 3) Forensics is an activity course which includes: public speaking, oral interpretation and debate. Students participate in intercollegiate or community forensic contests and debate tournaments. (2 hr lab)
|
| |
-
SPT 1141 - Forensics II 1 SH
(Prerequisites: English and Reading Placement Level 3) A continuation of SPT 1131 . (2 hr lab)
|
| |
-
SPT 1153 - Voice, Diction and Phonetics 3 SH
(Prerequisites: English and Reading Placement Level 3) A study of the International Phonetic Alphabet and training in the phonetic transcription of speech for the improvement of voice and diction. Includes physical characteristics and production of sounds in American English, auditory training, articulation and standard pronunciations, and voice production. (3 hr lecture)
|
| |
-
SPT 1163 - Argumentation and Debate 3 SH
(Prerequisites: English and Reading Placement Level 3) The study and application of basic argumentative techniques; integration of speech techniques through class debates. (3 hr lecture)
|
| |
-
SPT 1223 - Movement for the Actor 3 SH
Techniques for stage movement for the actor.
|
| |
-
SPT 1233 - Acting I 3 SH
(Prerequisites: English and Reading Placement Level 3) An introduction to the training of the voice, body and imagination as the foundations of the work of an actor through the study of acting theory, vocabulary, theatrical games, monologue, and scene work. (Course description effective Fall 2013) (3 hr lecture)
|
| |
-
SPT 1241 - Drama Production I 1 SH
Participation in college drama productions. Required for theatre majors. (4 hr lab)
|
| |
-
SPT 1251 - Drama Production II 1 SH
Participation in college drama productions. Required for theatre majors. (4 hr lab)
|
| |
-
SPT 1273 - Theatrical Makeup 3 SH
Techniques in the application of makeup for the stage (2 hr lecture, 2 hr lab)
|
| |
-
SPT 2111 - Forensics III 1 SH
(Prerequisites: English and Reading Placement Level 3) A continuation of SPT 1141 . (2 hr lab)
|
| |
-
SPT 2121 - Forensics IV 1 SH
(Prerequisites: English and Reading Placement Level 3) A continuation of SPT 2111 . (2 hr lab)
|
| |
-
SPT 2143 - Oral Interpretation 3 SH
(Prerequisites: English and Reading Placement Level 3) Training is given in the techniques of oral interpretative presentation, its theories, and practices. (3 hr lecture)
|
| |
-
SPT 2173 - Interpersonal Communication 3 SH
(Prerequisites: English and Reading Placement Level 3) Theory and Analysis of dyadic relationships (one-on-one interactions). The course explores topics such as perception, listening, conflict management, relationship building and maintenance, and relational power. (3 hr lecture)
|
| |
-
SPT 2233 - Theatre Appreciation 3 SH
(Prerequisites: English and Reading Placement Level 3) An introduction of the cultural, historical, and social aspects of drama. Class content provides an appreciation of the theatre and performance art to develop audience standards through demonstration of the unique characteristics of theatre. A fine arts elective. (3 hr lecture)
|
| |
-
SPT 2241 - Drama Production III 1 SH
Participation in college drama productions. Required for theatre majors. (4 hr lab)
|
| |
-
SPT 2251 - Drama Production IV 1 SH
Participation in college drama productions. Required for theatre majors. (4 hr lab)
|
| |
-
SPT 2283 - Acting II 3 SH
(Prerequisites: SPT 1233 ) Continued training in the techniques of role preparation and character development through concentrated monologue and scene work. (3 hr lecture)
|
Surgical Technology |
| |
-
SUT 1113 - Fundamentals of Surgical Technology 3 SH
This is a basic introductory course including hospital and surgical suite organization and environment, history, legal responsibilities, terminology, interpersonal relationships, pharmacology, and anesthesia. (3 hr lecture)
|
| |
-
SUT 1216 - Principles of Surgical Technique 6 SH
(Corequisites: ENG 1113 ) This course is a comprehensive study of aseptic technique, safe patient care, and surgical techniques. (3 hr lecture, 6 hr lab)
|
| |
-
SUT 1314 - Surgical Anatomy 4 SH
Emphasis placed on structure and function of the human body as it is related to surgery. Application of the principles of surgical anatomy to participation in clinical experience. (4 hr lecture)
|
| |
-
SUT 1413 - Surgical Microbiology 3 SH
Introduction to pathogenic microorganisms related to surgery and their effect on wound healing and infection. Includes principles of sterilization and disinfection. (3 hr lecture)
|
| |
-
SUT 1518 - Basic and Related Surgical Procedures 8 SH
(Prerequisites: CPR-Health Care Provider, ENG 1113 , SUT 1113 , SUT 1216 , SUT 1314 , SUT 1413 ) This course includes instruction in regional anatomy, pathology, instrumentation, and surgical techniques in general surgery, gynecology, obstetrics, and urology. It requires clinical experience in area hospital surgical suites and related departments. (4 hr lecture, 12 hr clinical)
|
| |
-
SUT 1528 - Specialized Surgical Procedures 8 SH
(Prerequisites: CPR-Health Care Provider, ENG 1113 , SUT 1113 , SUT 1216 , SUT 1314 , SUT 1413 ) This course includes instruction in regional anatomy, pathology, instrumentation, and techniques in surgical specialty areas of ear, nose, and throat; eye; oral and maxillofacial surgery, pediatrics and plastic. This course requires clinical experience in area hospital surgical suites and related departments. (4 hr lecture, 12 hr clinical)
|
| |
-
SUT 1538 - Advanced Surgical Procedures 8 SH
(Prerequisites: SUT 1518 , SUT 1528 ) This course includes instruction in regional anatomy, pathology, instrumentation, and techniques in surgical specialty areas of orthopedics, neurosurgery, thoracic, vascular, cardiovascular surgery, and employability skills. This course requires clinical experience in area hospital surgical suites, and related departments, and a comprehensive final examination. (4 hr lecture, 12 hr clinical)
|
Telecommunications Technology |
| |
-
TCT 1114 - Fundamentals of Telecommunications 4 SH
This course is designed to acquaint the student with the history of voice/data communication, fundamental concepts, and basic telephone service. (3 hr lecture, 2 hr lab)
|
| |
-
TCT 2214 - Telephone Systems 4 SH
(Pre/Corequisites: TCT 1114 ) This course gives the student information and hands-on experience in installation, operation, troubleshooting, and repair of commercial use telephone systems including analog and digital key systems. (3 hr lecture, 2 hr lab)
|
| |
-
TCT 2224 - PBX Systems 4 SH
(Prerequisites: TCT 2214 ) This course is a continuation of the PBX section of Telephone Systems (TCT 2214 ). This course will further emphasize the installation, programming, and troubleshooting of PBX systems. Maintenance, cleaning, and paperwork will be covered. (2 hr lecture, 4 hr lab)
|
| |
-
TCT 2314 - Digital Communications I 4 SH
(Prerequisites: TCT 1114 , EET 1214 ) Theories and applications of digital communications and analog pulse modulation. (2 hr lecture, 4 hr lab)
|
| |
-
TCT 2324 - Digital Communications II 4 SH
(Prerequisites: TCT 2314 ) Theories and applications of digital modulation methods and digital pulse modulation methods. (2 hr lecture, 4 hr lab)
|
| |
-
TCT 2414 - Microwave and Satellite Systems 4 SH
(Prerequisites: Instructor‘s consent) This course is designed to develop understanding and skills associated with microwave and satellite applications in the telecommunications industry. (3 hr lecture, 2 hr lab)
|
| |
-
TCT 2424 - Network Systems 4 SH
(Prerequisites: TCT 2214 , EET 2423 ) This course covers networking fundamentals, voice networking, LAN‘s and Internetworking. This course will cover upgrading of computers to support LAN technology including hardware and software and running and termination network media including Cat. 3 twisted pair cable, coaxial cable, and fiber optic cable. (2 hr lecture, 4 hr lab)
|
| |
-
TCT 2913 - Special Project 3 SH
(Prerequisites: Consent of Instructor) This course is designed to provide the student with practice application of skills and knowledge gained in other electronics or electronics-related technical courses. The instructor works closely with the student to insure that the selection of a project will enhance the student‘s learning experience. (6 hr lab)
|
| |
-
TCT 2923 - Supervised Work Experience 3 SH
(Prerequisites: Consent of Instructor and completion of at least one semester of advanced coursework in electrical/electronics related programs) This course is a cooperative program between industry and education and is designed to integrate the student‘s technical studies with industrial experience. Three credits are awarded on the basis of 135 industrial contact hours.
|
Veterinary Technology |
| |
-
VAT 1111 - Veterinary Mathematics 1 SH
(Prerequisites: Successful completion of first semester‘s VAT courses with a grade of “C” or higher) Reviews general mathematics and presents metric-apothecary conversions, calculations of oral and parenteral dosages, drug classification, and abbreviations and symbols. Special attention is given to veterinary clinical work problems. (1 hr lecture)
|
| |
-
VAT 1113 - Vet Lab 1 3 SH
The practical application of animal restraint and medication is the study and practice of restraining animals, utilizing both chemical and physical mean. Included in the course are medical terminology and the administration and general knowledge of common drugs and vaccines. (6 hr clinical)
|
| |
-
VAT 1122 - Office Procedures/Veterinary Terminology 2 SH
Veterinary technician‘s role in practice management; accounting basics, personnel management, leadership skills‘ stress management‘ customer relations and practice ethics. The course will include a study of the veterinary medical terms relating to Anatomy & Physiology, diseases, medical procedures, and clinical practice. (2 hr lecture)
|
| |
-
VAT 1123 - Vet Lab 2 3 SH
(Prerequisites: Successful completion of first semester‘s VAT courses with a grade of “C” or higher) Practical application of surgical and hospital techniques I is the study and practical application of sterile techniques, preparation of the surgical site, operating room conduct, assisting the surgeon, pre-anesthetic, anesthesiology, and anesthetic emergencies. (6 hr clinical)
|
| |
-
VAT 1212 - Animal Restraint and Medication 2 SH
Animal restraint and medication is the study and practice of restraining small animals, utilizing both chemical and physical means of safe and humane restraint. Included in the course is basic terminology, usage, administration, and general knowledge of common drugs and vaccines. Students will become familiar with Medical Terminology. (2 hr lecture)
|
| |
-
VAT 1314 - Animal Anatomy and Physiology 4 SH
(Prerequisites: Successful completion of first semester‘s VAT courses with a grade of “C” or higher) Animal Anatomy and Physiology introduces the student to basic anatomy and physiology as related to the needs of a Veterinary Technician. Special emphasis is given to the structure of a selected cadaver, location of specific structures, and functions of these structures. (3 hr lecture, 2 hr lab)
|
| |
-
VAT 1413 - Surgical and Hospital Techniques 3 SH
(Prerequisites: Successful completion of first semester‘s VAT courses with a grade of “C” or higher) Surgical and Hospital Techniques I is the study and practical application of sterile techniques, preparation of the surgical site, operating room conduct, assisting the surgeon, pre-anesthetic, anesthesiology, and anesthetic (3 hr lecture)
|
| |
-
VAT 1513 - Veterinary Lab Evaluation 3 SH
(Prerequisites: Successful completion of all 1st year VAT courses with a grade of “C” or higher.) The evaluation of students who have successfully completed the first year of the hybrid online veterinary technology curriculum. The evaluation of students will include the classes of VAT 1111 VAT 1122 , VAT 1413 ,Vet Lab 1 VAT 1113 , VAT 2112 , and VAT 1123 . (Students enrolled in the hybrid online program will be required to meet with the HCC faculty and staff on the Raymond campus at a scheduled time during the summer. Students enrolled in the classroom program are not required to meet with the faculty during the summer.)
|
| |
-
VAT 1514 - Veterinary Lab Evaluation 4 SH
(Prerequisites: Successful completion of all 1st year VAT courses with a grade of “C” or higher.) The evaluation of students who have successfully completed the first year of the hybrid online veterinary technology curriculum. The evaluation of students will include the classes of VAT 1111 , VAT 1122 , VAT 1123 , VAT 1113 , VAT 1413 , and VAT 2112 . (Students enrolled in the hybrid online program will be required to meet with the HCC faculty and staff on the Raymond campus at a scheduled time during the summer. Students enrolled in the classroom program are not required to meet with the faculty during the summer.)
|
| |
-
VAT 1515 - Veterinary Lab Evaluation 5 SH
(Prerequisites: Successful completion of all 1st year VAT courses with a grade of “C” or higher.) The evaluation of students who have successfully completed the first year of the hybrid online veterinary technology curriculum. The evaluation of students will include the classes of VAT 1111 VAT 1122 , VAT 1413 ,Vet Lab 1 VAT 1113 , VAT 2112 , and VAT 1123 . (Students enrolled in the hybrid online program will be required to meet with the HCC faculty and staff on the Raymond campus at a scheduled time during the summer. Students enrolled in the classroom program are not required to meet with the faculty during the summer.)
|
| |
-
VAT 1516 - Veterinary Lab Evaluation 6 SH
(Prerequisites: Successful completion of all 1st year VAT courses with a grade of “C” or higher.) The evaluation of students who have successfully completed the first year of the hybrid online veterinary technology curriculum. The evaluation of students will include the classes of VAT 1111 VAT 1122 , VAT 1413 ,Vet Lab 1 VAT 1113 , VAT 2112 , and VAT 1123 . (Students enrolled in the hybrid online program will be required to meet with the HCC faculty and staff on the Raymond campus at a scheduled time during the summer. Students enrolled in the classroom program are not required to meet with the faculty during the summer.)
|
| |
-
VAT 2112 - Veterinary Pharmacology 2 SH
(Prerequisites: Successful completion of first year VAT courses with a grade of “C” or higher) The student will be instructed in basic knowledge of various aspects of pharmacology. This will include the area pharmacokinetics, proper handling of Controlled Substances dosage calculation and fluid therapy. (2 hr lecture)
|
| |
-
VAT 2113 - Animal Health Care 3 SH
(Prerequisites: Successful completion of first year VAT courses with a grade of “C” or higher) General health care of small animals including nutrition, emergency care, first aid, animal hygiene, disease detection, and small animal sanitation. (3 hr lecture)
|
| |
-
VAT 2122 - Board Examination Review 2 SH
(Prerequisites: Successful completion of first, second, and third semester VAT courses with a grade of “C” or higher) Comprehensive review to assist the student in preparation for state and national certifying examinations for the veterinary technicians. The course will review basic science, clinical practices, diagnostics, and ethical concerns. (2 hr lecture)
|
| |
-
VAT 2133 - Vet Lab 3 3 SH
(Prerequisites: Successful completion of first year VAT courses with a grade of “C” or higher) Includes practical application of veterinary diagnostic aids, hematology, blood chemistries, serology, urinalysis, fecal analysis, and organ function test. (6 hr clinical)
|
| |
-
VAT 2143 - Vet Lab 4 3 SH
(Prerequisites: Successful completion of first, second, and third semester VAT courses with a grade of “C” or higher) Includes practical application of large animal, exotic and laboratory animals. (6 hr clinical)
|
| |
-
VAT 2152 - Animal Parasites and Diseases 2 SH
(Prerequisites: Successful completion of first, second, and third semester VAT courses with a grade of “C” or higher) Animal Parasites and Diseases will include the study of etiology, symptoms, pathology, transmission, duration, prognosis, prevention, and general knowledge of common parasites and diseases of farm animals and pets. (2 hr lecture)
|
| |
-
VAT 2163 - Clinical Pathology 3 SH
(Prerequisites: Successful completion of first year VAT courses with a grade of “C” or higher) Clinical Pathology is the study and practical application of veterinary diagnostic aids. The course includes hematology, blood chemistries, serology, urinalysis, fecal analysis, and organ function test. (3 hr lecture)
|
| |
-
VAT 2172 - Exotic/Lab Animal Procedures 2 SH
(Prerequisites: Successful completion of first, second, and third semester VAT courses with a grade of “C” or higher) The student will be instructed in the care and handling of laboratory animals and wild, exotic, and zoo animals. Maintenance of health laboratory animals to include proper nutrition, husbandry and handling will be emphasized. (2 hr lecture)
|
| |
-
VAT 2183 - Veterinary Internship/Lab Evaluation 2 3 SH
(Prerequisites: Successful completion of all academic and techncial courses in the veterinary technology curriculum with an overall GPA of 2.0 and a grade of “C” or higher in all required VAT courses.) Internship. Both online and classroom Veterinary Technician students will be required to complete a 6 week internship with an “APPROVED” veterinary practice and/or a laboratory animal facility. The internship provides hands-on experience in a small animal, mixed animal, large animal or laboratory animal facility. The evaluation of students will include the classes of VAT 2113 , VAT 2163 , VAT 2272 , VAT 2133 , VAT 2223 , VAT 2152 , VAT 2122 , and VAT 2143 . (Students enrolled in the classroom program are not required to meet with the faculty during the summer.)
|
| |
-
VAT 2184 - Veterinary Internship/Lab Evaluation 2 4 SH
(Prerequisites: Successful completion of all academic and techncial courses in the veterinary technology curriculum with an overall GPA of 2.0 and a grade of “C” or higher in all required VAT courses.) Internship. Both online and classroom Veterinary Technician students will be required to complete a 6 week internship with an “APPROVED” veterinary practice and/or a laboratory animal facility. The internship provides hands-on experience in a small animal, mixed animal, large animal or laboratory animal facility. The evaluation of students will include the classes of VAT 2113 , VAT 2163 , VAT 2272 , VAT 2133 , VAT 2223 , VAT 2152 , VAT 2122 , and VAT 2143 . (Students enrolled in the classroom program are not required to meet with the faculty during the summer.)
|
| |
-
VAT 2185 - Veterinary Internship/Lab Evaluation 2 5 SH
(Prerequisites: Successful completion of all academic and techncial courses in the veterinary technology curriculum with an overall GPA of 2.0 and a grade of “C” or higher in all required VAT courses.) Internship. Both online and classroom Veterinary Technician students will be required to complete a 6 week internship with an “APPROVED” veterinary practice and/or a laboratory animal facility. The internship provides hands-on experience in a small animal, mixed animal, large animal or laboratory animal facility. The evaluation of students will include the classes of VAT 2113 , VAT 2163 , VAT 2272 , VAT 2133 , VAT 2223 , VAT 2152 , VAT 2122 , and VAT 2143 . (Students enrolled in the classroom program are not required to meet with the faculty during the summer.)
|
| |
-
VAT 2186 - Veterinary Internship/Lab Evaluation 2 6 SH
(Prerequisites: Successful completion of all academic and techncial courses in the veterinary technology curriculum with an overall GPA of 2.0 and a grade of “C” or higher in all required VAT courses.) Internship. Both online and classroom Veterinary Technician students will be required to complete a 6 week internship with an “APPROVED” veterinary practice and/or a laboratory animal facility. The internship provides hands-on experience in a small animal, mixed animal, large animal or laboratory animal facility. The evaluation of students will include the classes of VAT 2113 , VAT 2163 , VAT 2272 , VAT 2133 , VAT 2223 , VAT 2152 , VAT 2122 , and VAT 2143 . (Students enrolled in the classroom program are not required to meet with the faculty during the summer.)
|
| |
-
VAT 2223 - Large Animal Procedures 3 SH
(Prerequisites: Successful completion of first, second, and third semester VAT courses with a grade of “C” or higher) The student will be instructed in the care and handling of equine and food animals. Maintenance of health care to include proper nutrition, husbandry and handling will be emphasized. (3 hr lecture)
|
| |
-
VAT 2272 - Principles of Imaging 2 SH
(Prerequisites: Successful completion of first, second, and third semester VAT courses with a grade of “C” or higher) Radiology includes general concept of radiology, exposure, positioning, developing techniques and solving common problems of radiology. Safety is emphasized throughout the course. The course also includes exposure to ultrasound diagnostic. (2 hr lecture)
|
Welding and Cutting |
| |
-
WLV 1115 - Shielded Metal Arc Welding I (SMAW) 5 SH
A course designed to teach students welding techniques using electrodes. (1 hr lecture, 8 hr lab)
|
| |
-
WLV 1116 - Shielded Metal Arc Welding I (SMAW) 6 SH
The course is designed to teach students welding techniques using E-6010 electrodes. (1 hr lecture, 10 hr lab),
|
| |
-
WLV 1124 - Gas Metal Arc Welding (GMAW) 4 SH
A course designed to give the student experience in various welding applications with the GMAW welder including short circuiting and pulsed transfer. (1 hr lecture, 6 hr lab)
|
| |
-
WLV 1136 - Gas Tungsten Arc Welding (GTAW) 6 SH
A course designed to give the student experience in various welding applications with the GTAW welder. (1 hr lecture, 10 hr lab)
|
| |
-
WLV 1143 - Flux Cored Arc Welding (FCAW) 3 SH
A course designed to give the student experience in FCAW. (1 hr lecture, 4 hr lab)
|
| |
Page: 1 <- Back 10 … 7
| 8
| 9
| 10
| 11
| 12
| 13
| 14
| 15
| 16
| 17
|
Print this Page